CSFB主被叫信令流程介绍.pptxVIP

CS Fallback基本信令介绍2015.May.26郑州联合注册流程联合跟踪区更新流程CSFB主被叫流程2GBTSBSCMSSSIMHLR4GeNodeBMME在2/3G及4G网络同时注册数据业务用4G网络语音业务用2/3G网络，接续时延短2/3G与LTE无需互操作单卡双待手机2GBTS/NODEBBSC/RNCMSSSIMHLR4GeNodeBMME仅在4G网络注册进行主被叫时回落到GSM/TDS网络，结束后再返回4G网络。接续时延稍长CSFB手机单卡双待与CSFB手机的注册UEeNBMMES/P-GWMSC/VLRHSSRandom Access Sequence如果NAM=ONLY_PACKET，MME不再向MSS发起LU流程，直接给UE回送TAU AcceptRRC Connection Setup RequestRRC连接建立RRC Connection RequestRRC Connection Setup CompleteAttach request (Combined EPS/IMSI attach,GUTI,UE capacity,TAI,LAI)InitialUEmessage + AttachRequest+PDN connectivity RequestS6a-Update Location Request (MME name, IMSI) Identity request/responseS6a-Update Location Accept (NAM =PACKET_AND_CIRCUIT)Create Session req (IMSI, MSISDN, QoS, APN)Create Session resp (PDN add, TEID-C, TEID-U, EBI)SGsAP-Update Location Request (LAI，IMSI, MME address) TAI- LAI -MSC/VLRLocation Update in CS domainSGsAP-Update Location Accept (VLR Num, TMSI) SecurityModeCommandSecurityModeCompleteInitialContextSetupRequest+Attach Accept (combined EPS/IMSI attach,TAI,GUTI,LAI,TMSI,)+ActivateDefault EPS Bearer Context Request(QCI,APN,PDN ADDRESS,QOS,APN-AMBR)SecurityModeCommandUE CapabilityEnquirySecurityModeCompleteUE CapabilityInformationRRC Connection Reconfiguration+ Attach Accept(combined EPS/IMSI attach,TAI,GUTI,LAI,TMSI)RRC Connection Reconfiguration CompleteInitialContextSetupResponse如果在Attach Accept包含新的TMSIUE CapabilityInformationIndicationAttach CompleteSGsAP-TMSI-REALLOCATION-COMPLETE ActivateDefault EPS Bearer Context Accept联合EPS/IMSI附着流程如果UE支持CSFB功能，会发起附着类型”Combined EPS/IMSI Attach”的附着请求。如果不支持CSFB功能，附着类型为”EPS Attach”。UE是否具有GERAN/UTRAN重定向能力，通知给eNodeB及MMEMME代替UE向MSS执行LU过程。如果LU过程成功，SGs的状态为SGs-ASSOCIATED。为用户建立了SGs关联，就是在VLR中存储了用户的MME地址，同时也在MME中保存了用户的VLR的地址。如在联合注册过程中，MSS给用户分配了新的TMSI，却未收到SGsAP-TMSI-REALLOCATION-COMPLETE，不影响该用户SGs的状态。CS Paging时用IMSI代替TMSI。如果UE驻留在GERAN/UTRAN时，MSS通过A/Iu正在Paging该UE。此时UE发起联合注册，MSS会停止Paging，给MME返回SGsAP-LOCATION-UPDATE-ACCEPT 。LU过程不成功，MSS发SGsAP-LOCATION-UPDATE-REJECT给MME。VLR将该用户的SGs状态置为SGs-NULL。在