[铸造第一节080828.pptVIP

硅电池焊接工艺 张剑琴 2011/08/06 概述 焊接是为了将电池片连接起来成为组件。由正面焊接和反面焊接两个工序组成。正面焊接是为了将硅电池片与互连条连接在一起，为下一步的反面焊接（即焊串）做准备。 焊接完成后，测试发现会有隐裂产生，影响电池组件寿命。于是成立了隐裂小组，希望能够降低电池焊接后的隐裂率。 经过实验跟踪发现，电池片隐裂产生在反面焊接，正面焊接后不产生隐裂。 研究问题 希望通过对反面焊接方法进行改善来提高电池片反面焊接质量，降低隐裂。 焊接参数 硅电池片规格：125S（单晶 边长125㎜ 厚度180~190μm） 焊接温度：正面：315±5℃ 背面：335±5℃ 加热垫：55±5 ℃（焊接时垫于电池片下方，用于预热电池片） 图片示例 电池片正面（焊串完成） 焊串后的硅电池背面 注意事项 1.互连条材料主要是铜，外面包着银 2.背电极为银浆 3.焊接时注意：焊头与焊接表面充分接触 * The square marks represent the experimentally obtained compositions with the highest GFA in the relevant composition ranges. The cross mark indicate the compositions experimentally studied * The square marks represent the experimentally obtained compositions with the highest GFA in the relevant composition ranges. The cross mark indicate the compositions experimentally studied * The square marks represent the experimentally obtained compositions with the highest GFA in the relevant composition ranges. The cross mark indicate the compositions experimentally studied * The square marks represent the experimentally obtained compositions with the highest GFA in the relevant composition ranges. The cross mark indicate the compositions experimentally studied * The square marks represent the experimentally obtained compositions with the highest GFA in the relevant composition ranges. The cross mark indicate the compositions experimentally studied * The square marks represent the experimentally obtained compositions with the highest GFA in the relevant composition ranges. The cross mark indicate the compositions experimentally studied * The square marks represent the experimentally obtained compositions with the highest GFA in the relevant composition ranges. The cross mark indicate the compositions experimentally studied * The square marks represent the experimentally obtained compositions with the highest GFA in the relevant composition ranges. The cross mark indicate the compositions experimentally studied * The square marks repre