- 3
- 0
- 约1.4万字
- 约 31页
- 2017-01-08 发布于辽宁
- 举报
毕业设计说明书
学生姓名: 黄邦 学 号:
学 院: 机电工程学院
专业年级: 09级热能与动力工程二班
题 目: 苏丹东卡哈拉主泵站的概念设计及主泵
选型设计
指导教师: 杨辉 副教授
评阅教师: 谢洁飞 副教授
2013 年 5月
摘要
苏丹东卡哈拉主泵站位于苏丹尼罗河旁边,设计此泵站总的提水量为32立方米每秒,设计过程中采用的是9台立式斜流泵,8台泵参与工作,一台备用,每台斜流泵的流量为4立方米每秒,选用与泵配套的电机是在长沙电机厂找得的一种YKK系列的大型三相异步电动机 。水泵采用的是单独钢管出水,直到出水池,水泵采用电动机直联驱动。泵房采用水下桩基础形式,水泵为湿坑进水形式,水泵直接放置于河水中从河里取水,所以设计的泵房为湿室型泵房。此泵站中设计的辅助设备有起重设备、计量设备、通风设备和防水锤设备。采用的计量设备是电磁流量计,起重设备是QD型电动双梁双钩桥式起重机,通风设备是轴流通风机,本泵站采用缓闭阀门来减少水锤的冲击。
关键词:泵站,立式斜流泵,电机,泵房
Su Dandong kahala pumping stations
Abstract:
Su Dandong hala pumping station next to the Nile in Sudan,Design the pump station in water yield is 32 cubic meters per second,Used in the process of design is 9 sets of vertical oblique flow pump,8 pump to participate in the work,A backup,Each oblique flow pump flow rate of 4 cubic meters per second,Selection of motor and pump matching is in changsha motor factory have to find a large YKK series three-phase asynchronous motor。Pump uses is separate steel pipe water, until out of the pool, water pump driven by motor straight league. Pump adopts the form of underwater pile foundation, the water pump is a wet pit water form, water pump placed directly on the river of water from the river, so the design of the pump room for wet room type pump room. This pump station in the design of auxiliary equipment lifting equipment, measuring equipment, ventilation equipment and water hammer. Is the electromagnetic flowmeter, measuring equipment used lifting equipment is QD type electric double double beam bridge crane, ventilation is axial flow blower, the pump station adopts gradual closing valve to reduce the impact of water hammer.
Key word:pump stations,vertical oblique flow pump,motor,pump house
目 录
第1章 1
1绪论 1
1.1 设计内容 1
1.1.1 设计题目:苏丹东卡哈拉主泵站的概念设计及主泵选型设计 1
1.1.2 设计目的 1
1.1.3 泵站设计水量:32m3/s。 2
1.1.4 设计任务 2
1.2 设计资料 2
第2章 计算说明书 3
2.1水泵和
您可能关注的文档
- 车汽防盗报警器的设计--本科毕业设计.doc
- 车汽火灾事故分析及预防--本科毕业设计.doc
- 车汽后桥半轴淬火机升降部分及尾座设计 说明书--本科毕业设计.doc
- 车汽举升机的设计 机械原理课程设计--本科毕业设计.doc
- 车汽排放污染的控制措施与研究--本科毕业设计.doc
- 车汽空调系统检修--本科毕业设计.doc
- 车汽某支架冲压工艺及模具设计--本科毕业设计.doc
- 车汽天窗的整体结构设计--本科毕业设计.doc
- 车汽票订票系统--本科毕业设计.doc
- 车汽尾气质量检测系统设计--本科毕业设计.doc
- 刀犁变速齿轮箱体钻孔攻丝双工位组合机床双侧4m8说明书全套cad图纸--本科毕业设计.doc
- 岛海棉抗黄萎病相关基因gbeds1的克隆与生物信息学分析--本科毕业设计.doc
- 岛青某啤酒厂污水处理站设计 --本科毕业设计.doc
- 岛青地铁某隧道断面支护设计 --本科毕业设计.doc
- 岛青啤酒公司营销大区内部管理问题研究--本科毕业设计.doc
- 岛青市滨海公路第六标段施组设计--本科毕业设计.doc
- 到回桃花源徐州月亮湾生态园项目计划书--本科毕业设计.doc
- 道管公司物料流通管理系统的设计与实现--本科毕业设计.doc
- 道管公司物料流通管理系统设计与实现--本科毕业设计.doc
- 道管清淤机器人及控制系统研究--本科毕业设计.doc
原创力文档

文档评论(0)