安全阀外文翻译安全外文翻译.doc

华中科技大学文华学院 毕业设计（论文）外文文献翻译 题 目： 基于对MathCAD的连杆机构运动分析 学 生 姓 名： 冯洋 学号： 080302011108 学 部 （系）： _机械与电气工程学部__ 专 业 年 级： 08级机械设计制造及其自动化(1)班 指 导 教 师： 孟超莹 职称或学位：_ 助 教 _ 2011 年 4 月 1 日 外文文献翻译（译成中文1000字左右）： 【主要阅读文献不少于5篇，译文后附注文献信息，包括：作者、书名（或论文题目）、出 版 社（或刊物名称）、出版时间（或刊号）、页码。提供所译外文资料附件（印刷类含封面、封底、目录、翻译部分的复印件等，网站类的请附网址及原文】 ABSTRACT: In this paper, it had predominantly discussed swing-type feeding mechanism for design of the model by Math CAD software, and takes it as the example typically; it also focused on contemporary international research on the swing type feeding mechanism, contributing original views on the scope of its analytical procedure. By the kinetics standpoint it had built up a position expression type of the link mechanism, in addition, explained clearly the automatic computation its data of movement analysis and the result process in graph, finally, there alization method about the link mechanism movement simulation had been introduced. KEY WORDS: link mechanism; math CAD; slipper block; movement analysis; simulation. I. INTRODUCTION Over the past few decades, engineering schools have placed a high priority on incorporating computer technology into the engineering curriculum and this has been no incidental achievement Specially, this article take swings feeds in the analysis of mechanism as an example, introduced using the Math CAD software to carry on the movement analysis and the simulation method to analyze the swing-type feeding mechanism, and explain the theories analytical method of these type of engineering problem thereby. II. MOVEMENT ANALYSIS OF LINK MECHANISM This swing-type feeding in the mechanism, the anti clock wise rate of angular motion of original moving parts is:ω1= 40rad/s ，and its structure with various components size as shown in Fig.1.In Fig.1 above the swing-type feeding in the mechanisms consist of the crank original moving parts 1 i.e. _grade pole group and the _ grade pole group. In