制造业用于提高表面光洁度和减少切削力的抛丸清理机-毕设翻译..docxVIP

毕业设计（论文）英文资料翻译Micro Shot Blasting of Machine Tools学 院：西北工业大学明德学院专 业：机械设计制造及自动化班 级： 161003班 姓 名： 王 伟 学 号：指导老师： 2015年 6 月Micro shot blasting of machine tools for improving surface finishand reducing cutting forces in manufacturingD.M. Kennedy *, J. Vahey, D. HanneyFaculty of Engineering, Dublin Institute of Technology, Bolton Street, Dublin 1, IrelandReceived 5 January 2004; accepted 3 February 2004Available online 13 April 2004AbstractMicro blasting of cutting tips and tools is a very effective and reliable method of advancing the life of tools under the action ofturning, milling, drilling, punching and cutting. This paper outlines the ways in which micro blasted tools, both coated and uncoatedhave benefited from shot blasting and resulted in greater productivity, lower cutting forces, improved surface finish of the workpieces and less machine downtime. The process of micro blasting is discussed in the paper. Its effectiveness depends on many parametersincluding the shot media and size, the mechanics of impact and the application of the shot via the micro shot blasting unit.Control of the process to provide repeatability and reliability in the shot blasting unit is discussed. Comparisons between treated anduntreated cutting tools are made and results of tool life for these cutting tips outlined. The process has shown to be of major benefitto tool life improvement.2004 Elsevier Ltd. All rights reserved.Keywords: Micro shot blasting; Surface finish; Machine tools1. IntroductionMany modern techniques have been developed toenhance the life of components in service, such as alloyingadditions, heat treatment, surface engineering,surface coating, implantation processes, laser treatmentand surface shape design. Processes such as thin filmtechnology, plasma spraying, vacuum techniques depositinga range of multi-layered coatings have greatlyenhanced the life, use and applications of engineeringcomponents and machine tools.