shriramdeobabakamlanehruengineeringcollege,nagpur.docVIP

ENGINEERING GRAPHICS QUESTION BANKS A line AB is in the first quadrant. Its end A and B are 20mm and 60mm in front of the VP respectively. The distance between the end projections is 75mm. The line is inclined at 300 to the HP and its HT is 10mm above xy. Draw the projections of AB and determine its true length and the VT. The front view of a line AB measures 70mm and makes an angle of 450 with XY. A is in the HP and the VT of the line is 15mm below the HP. The line is inclined at 300 to the VP. Draw the projections of AB and find its true length, inclination with the HP and its HT. A line 75mm long is inclined at 300 to HP. The end P is 15mm above HP and Q is 40mm in front of VP. Draw projections of the line if its front view measures 50mm. Locate traces. A thin square plate with 40 mm side stands on one of its corners on the HP and the opposite corner is raised so that one of its diagonals is twice that of the others. If one of the diagonals ids parallel to both the reference planes draw its projections and determine an inclination of the plate with the HP. Draw rectangle of 50 mm x 30mm sides, longer side making an angle of 350 with the reference line xy in the top view. Corresponding to this draw any parallelogram on the front view. These two views represent the front and top view of the quadrilateral thin plate. Determine true shape of the plate. The front view of a plane figure is a line inclined at 450 to XY and its TV is a regular hexagon of sides 30mm with one side of it parallel to XY. Draw FV and TV also find its true shape. A equilateral triangle ABC having side length of 50 mm is suspended from a point O on the side AB 15 mm from A in such way that the plane of triangle make an angle 600 with VP. Point O with 40 mm in front of VP and is above HP. draw three views of triangle. A pentagonal plane ABCDE, of side 35 mm has its side AB in VP and inclined at 45 to HP. Draw the projections when opposite corners to that edge is 45mm in front