02__AS_15545-2004澳大利亚焊接标准(高应力载荷钢结构)第5部分..doc

AS/NZS 1554.5:2004 Australian/New Zealand Standard? Structural steel welding 澳大利亚/新西兰结构钢焊接标准 Part 5: Welding of steel structures subject to high levels of fatigue loading 第5部分： 高强度抗疲劳载荷钢结构焊接  AS/NZS 1554.5:2004 前版本 1554.5—1989. Previous edition AS/NZS 1554.5:1995. Third edition 2004.年再版，第三版 COPYRIGHT版权 ? Standards Australia/Standards New Zealand 澳大利亚标准/新西兰标准 All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher. 保留所有权。在未经过出版商书面允许的情况下，不允许以任何形式或方式，电子或机械，包括拷贝复制本标准。 Jointly published by Standards Australia International Ltd, GPO Box 5420, Sydney, NSW 2001 and Standards New Zealand, Private Bag 2439, Wellington 6020 ISBN 0 7337 5735 9 本标准是由澳大利亚标准国际公司，新威尔士悉尼邮政信箱5420,和新西兰标准协会，惠灵顿6260，私人信箱2439联合出版  PREFACE 前言 This Standard was prepared by the Joint Australian/New Zealand Committee WD-003,Welding of Structures, to supersede AS/NZS 1554.5:1995. 本结构焊接标准是由澳大利亚/新西兰委员会WD-003联合编制的，取代了AS/NZS 1554.5:1995版本。 The objective of this Standard is to provide rules for the welding of steel structures subject to high levels of fatigue loading. 编制本标准的目的是为满足高强度抗疲劳载荷钢结构焊接提供规定。 The objective of this edition is to update the Standard and bring it in line with the latest edition of AS/NZS 1554.1, Structural steel welding, Part 1: Welding of steel structures. 该版本的目的是该标准的升级，符合AS/NZS 1554.1最新版本标准结构钢焊接，第一部分：钢结构焊接。 This Standard specifically applies to welds subject to fatigue loading in excess of the range covered by AS/NZS 1554.1, Structural steel welding, Part 1: Welding of steel structures and hence, it should not be specified where AS/NZS 1554.1 is acceptable. 该标准专为适合于超过AS/NZS 1554.1，结构钢焊接，第一部分：结构钢的焊接规定的疲劳载荷范围的焊接，因此在AS/NZS 1554.1可接受的情况下则不需在特殊作出规定。 It is expected that welds covered by this Standard wil