CALL相关学习..docVIP

6.3 Security and Identification安全鉴定 6.3.1 Mobile Station Identification Number移动台识别号码 Mobile stations operating in the analog mode are identified by the mobile identification number (MIN) (see 2.3.1). Mobile stations operating in the CDMA mode are identified by the International Mobile Station Identity (IMSI)..14 Mobile Stations shall have two different identifiers, IMSI_T and IMSI_M. The IMSI consists of up to 15 numerical characters (0-9). The first three digits of the IMSI are the Mobile Country Code (MCC), and the remaining digits are the National Mobile Station Identity (NMSI). The NMSI consists of the Mobile Network Code (MNC) and the Mobile Station Identification Number (MSIN). The IMSI structure is shown in Figure移动台的模拟经营模式所确定的移动识别号码（分） （见2.3.1 ） 。移动台在CDMA业务模式所确定的国际移动台识别（ IMSI ） .. 14个移动站须有两个不同的标识符， IMSI_T和IMSI_M 。该IMSI包括多达15个数字字符（ 0-9 ） 。前三个数字IMSI是移动国家代码（移动） ，剩下的数字是全国的Mobile Station身份（ NMSI ） 。该NMSI包括移动网络代码（跨国公司）和移动台识别号码（ MSIN ） 。该IMSI结构图 6.3.1-1. // An IMSI that is 15 digits in length is called a class 0 IMSI (the NMSI is 12 digits in length); an IMSI that is less than 15 digits in length is called a class 1 IMSI (the NMSI is less than 12 digits in length). IMSI_M is an IMSI that contains a MIN in the lower ten digits of the NMSI. An IMSI_M can be a class 0 or a class 1 IMSI. If the IMSI_M is not programmed, the mobile station shall set the four least-significant digits of the IMSI_M to the value of the ESNp, converted directly from binary to decimal, modulo 10000. The other digits shall be set to 0. // IMSI_M是一个在NMSI的低10个数字包含一个MIN的IMSI。IMSI_M可以是class 0或者是class 1的IMSI。如果IMSI_M没有被编程设定，手机应该设置IMSI_M中四个最少的标志数字为ESNp的值，被直接的从二进制转换到十进制，以模10000计算。其他的数字应该被设置成0。 IMSI_T is an IMSI that is not associated with the MIN assigned to the mobile station. An IMSI_T can be a class 0 or class 1 IMSI. If the IMSI_T is not programmed, the mobile station shall set the four least-significant digits of the IMSI_T to the value of the ESNp, converted directly from binary to decima