科技论文写作 科技论文写作4.doc

科技论文写作 科技论文写作4 第十二讲 实验和方法作用：1．让同领域的研究者在必要时可重复和验证2． 证明所采用的方法是能被认可的正确方法 实验和方法部份应包括以下内容1）对所用的材料、仪器、设备和系统的详细介绍2）对实验程序的说明如有必要，还需对以下内容说明3）对整个实验的概述… Unit 5 The broken computer单元重点测试一、A.看图写单词。（5分） B.汉译英。（5分）牙医 药物屏幕 开关 牙痛C.英汉互译（5分）在周末__________________ 打开_____________________… 2012年上期八年级生物教学计划在新的学期里本人将继续担任初二53、59、60三个班生物教学工作，为了出色的完成本学期的工作，特将本学期的教学工作计划如下：一、教学总体要求和教学目标继续认真学习《生物课程标准》，该标准是义务教育阶段生物教学的基本依据… 第十二讲 实验和方法 作用： 1．让同领域的研究者在必要时可重复和验证 2． 证明所采用的方法是能被认可的正确方法 实验和方法部份应包括以下内容 1）对所用的材料、仪器、设备和系统的详细介绍 2）对实验程序的说明 如有必要，还需对以下内容说明 3）对整个实验的概述 4）选用特定材料、设备或方法的理由 5）实验的特殊条件或工况，如温度、速度、压力等 6）特殊设备或方法的详细介绍 7）实验所应用的分析方法的描述 Example one TEST PROCEDURE （对整个实验的概述）When a structure to be analyzed is of considerable size, it is possible to test only some subsets, using substructuring procedures. Pseudo-dynamic techniques are an attractive tool for this purpose. The test specimen, assumed to be detached from a global structure, now has compatibility nodes or contact matching surfaces, which are assigned to internal degrees of freedom. In the experimental steps of the analysis, these nodes or surfaces are available to receive the installation of displacement actuators, as previously described. Furthermore, as only degrees of freedom along contact surfaces or matching nodes will be selected in this analysis, the test specimen is equivalent to a structure where condensation of internal degrees of freedom was carried out. （对所用的材料、仪器、设备和系统的详细介绍）The overall dimensions are given in Table 1 and the mechanical properties in Table 2. The test rig used for this purpose is schematically represented in Fig. 2. It consists of a simple and rigid L-shaped HEB beam arrangement with fixtures to receive two pairs of position motors. The position motors consist essentially of a precision worm gear-type speed reducer. Each pair can be driven simultaneously, therefore inducing a nodal displacement to the substructure test specimen, or they can be operated separately, generating an angular nodal r