毕业设计（论文）-一种停电后可人工操作的电动栏杆的设计（全套图纸三维）.doc

,ji 本科毕业设计 题 目: 一种停电后可人工操作的电动栏杆的设计的设计 学 院：____ 机电工程学院____ 专 业：_机械设计制造及其自动化 姓 名： 学 号：___________ 指导教师：______ _______ 2016年4月14日  摘要 本次设计的题目是一种停电后可人工操作的电动栏杆的设计，该电动栏杆它具有结构新颖、技术含量高、刚性和稳定性好、自动化程度高、造型美观、节能等特点。本机为左侧式，该产品为左侧型，使用温度为A级，栏杆长度为3m,升起时间为2S，无故障起落次数不小于1500000次，并且能够在停电的情况下可以手动升降，该产品是机、电一体化产品的典型代表。 以往的停车场使用的电动栏杆的主要方法都是依靠人工的方式，工作效率低下，与此同时，各方面也得不到保证，而本课题所设计的一种停电后可人工操作的电动栏杆，能够实现栏杆的自动升降，在某种程度上进一步实现了科技现代化，降低了劳动成本，特别与发达国家的电动栏杆相比，还是有一定的差距，因此的设计具有重要意义 全套图纸，加153893706  Abstract The topic of this design is the design of cotton packing machine. It has the characteristics of novel structure, high technology content, good rigidity and stability, high degree of automation, beautiful appearance, energy saving and so on. The machine is on top, so cotton without pollution, the V belt transmission through the transmission gear to drive the ball screw rod to rotate, the lifting of the ball screw so as to drive the pressing cotton plate movements, so as to carry out cotton compressed, packaged, the machine is mechanical, electrical integration products typical and representative. Traditional cotton packing method is by means of artificial, work efficiency is low. At the same time, packing quality also can not be guaranteed, but this topic design of cotton balers, cotton can be achieved automatic packaging, in artificial package based on greatly provided high production efficiency, reduce the labor cost, especially with the developed countries of the cotton packing equipment, or have a certain gap, so the cotton packing machine design has important significance. Key words: Cotton packing machine, transmission, efficiency, design 目 录 摘要 I Abstract II 1引言 1 1.1研究的目的和意义 1 1.2研究的内容 2 2一种停电后可人工操作的电动栏杆总体方案的设计 3 2.1工作原理 5 2.2机械部分的设计计算 7 2.2.1电机的选型计算 9 2.2.2齿轮传动的设计计算 10 2.2.3平键的选型计算 11 2.2.4转动轴的的设计计算 13 3一种停电后可人工操作的电动栏杆中主要零件的三维建模 15 3.1栏杆的三维建模 1