通信電子方向的几篇论文摘要及英文翻译.docVIP

摘 要 无线网络技术是21世纪全球信息技术发展的重要标志之一。如今，无线带来的便利我们可以体会得到，可其中却存在着很大的安全隐患。随着无线网络的快速发展，使我们更加重视其安全问题。由于无线网络的信息是通过微波辐射进行传播的，所以只要在无线网络节点覆盖的区域内，所有的工作站都有可能接收到信息，这对信息传播的安全性造成很大的威胁，进而各种有关无线安全的问题不断被发现。为了保护无线的安全，要不断完善安全管理的机制，以有效地防范安全风险，促进无线网络安全的健康发展。本次设计一个简单无线网络安全通信协议，使其在NS2网络模拟软件中进行模拟，观察其链路连接的过程，并对链路连接过程中的吞吐量、丢包率、延迟进行分析，通过仿真演示，使我们更加了解无线网络安全通信协议在网络中的运行过程，为以后通信协议的分析与设计提供可靠的依据。 关键词：无线网技术，服务区标示，无线安全，密钥设置，通信协议 ABSTRACT Wireless network technology is an important symbol of the 21st century global IT development. Nowadays, We can feel the convenience brought by the wireless network, but significant security risks still exist. With the rapid development of wireless networks, we pay more attention to its security problem. Since the wireless network information is transmitted by microwave radiation, within the area covered by the wireless network nodes, all workstations are likely to receive information, which will cause a great threat to the security of the information dissemination .Various problems related to wireless security have been found. In order to protect the wireless security, we should continuously improve the security management mechanism to effectively prevent the security risk, and promote the healthy development of wireless network security. Here I will design a simple wireless network security communication protocol, and simulate it in the NS2 network simulation software, then observe the process of link connections, and analysis the throughput, packet loss rate and delay in the process of link connections. With the result of the simulation, we can learn more about the running process of the wireless network security communication protocol, which will provide a reliable basis for the analysis and design of the communication protocol KEY WORDS：wireless network technology，ervice area identification，security，key setting, communication protocol 设计高速光纤传输系统，我们首要需考虑发送机，传输介质（光纤）和接收机三个基本组成部分的功能需求。再来还需要对系统的制式，速率，光纤选型加以完善的，全面的考虑。而同时又要注意减少光信噪比、非线性效应、色散、放大器增益平坦