section-avhf-dscequipmentoperation;.docVIP

Section-A: VHF-DSC Equipment Operation: Key Topic-1: Frequency and Bandwidth: 1A1 What are the correct VHF Channels and Frequencies for Calling/Distress, DSC and bridge-to-bridge operations? A. Ch-16, 156.800 MHz, Ch-70, 156.525 MHz and Ch-13, 156.650 MHz. B. Ch-06, 156.300 MHz, Ch-16, 156.800 MHz and Ch-13, 156.650 MHz. C. Ch-08, 156.400 MHz, Ch-70, 156.525 MHz and Ch-16, 156.800 MHz. D. Ch-06, 156.300 MHz, Ch-12, 156.600 MHz and Ch-13, 156.650 MHz. 1A2 What is the frequency separation between Transmit and Receive frequencies on a duplex channel? A. 2.8 MHz B. 4.6 MHz C. 6.4 MHz D. 10.7 MHz 1A3 What is the assigned channel spacing for VHF channels? A. 10 kHz B. 15 kHz C. 25 kHz D. 50 kHz 1A4 What is the allowed frequency tolerance for the DSC carrier frequencies? A. 10 Hz B. 20 Hz C. 5 ppm D. 10 ppm 1A5 Using a frequency counter with an accuracy of 2 ppm — which of the following are within legal tolerance for the frequencies of 156.800 MHz and 156.525 MHz? A. 156,798.758 kHz and 156.526.243 kHz. B. 156,798.735 kHz and 156,526.258 kHz. C. 156,801.567 kHz and 156,526.476 kHz. D. 156,798.635 kHz and 156,523.352 kHz 1A6 Using a frequency counter with an accuracy of 5 ppm — which of the following are within legal tolerance for the frequencies of 156.875 MHz and 157.200? A. 156,873.562 kHz and 157,198.264 kHz. B. 156,875.774 kHz and 157.199.321 kHz. C. 156,876.562 kHz and 157,201.355 kHz. D. 156,873.336 kHz and 157,201.570 kHz. Answers: 1A1: A 1A2: B 1A3: C 1A4: D 1A5: A 1A6: B Section-A: VHF-DSC Equipment Operation: Key Topic-2: Controls and Functions: 2A1 What is the purpose of the USA-INT switch? A. To provide for simplex operations with European Public Correspondence stations. B. To provide for duplex operations with U.S. Public Correspondence stations. C. To change from duplex to simplex operation on designated channels in European waters. D. To change from duplex to simplex operation on designated channels