宜昌长机科技公司英文版介绍).docVIP

YKS（D）5132 Brief Introduction:　YKS5132 Gear Shaping Machine is the newest product that our company develop, can process all kinds of disk gears, axis gears and helical gears. This machine is suitable for all kinds of changeover speed gear in automobile especially. The machine adopts column feed, servo control, frequency conversion. It can set up the number of times of cycle of cutting, and choose the best cutting parameter in big range. It can raise working efficiency and the precision of cutting. The machine has the characteristics of high rigidity and high accuracy.　The design of this machine is divided into one axis, two axes, and three axes.One axis: the primary motion and circular motion (B axis) adopt frequency conversion, and the radial feed (Y axis) adopts AC servo control, stepless speed changing.Two axes: the primary motion and circular motion (B axis) adopt frequency conversion, and the radial feed (Y axis) adopts AC servo control, stepless speed changing. Three axes: the primary motion adopts frequency conversion, cutter rotation (C axis), worktable rotation (B axis), and radial feed (Y axis) adopts AC servo control. Cutter rotation axis and worktable rotation axis through electronic register wheel, keep close communication and interaction in the process of manufacture.　Our company can increase the height of the machine, and provide the corresponding attachment according to the needs of customer, for instance: rack-cutting attachment, tailstock, special fixture, helical guide, special fixture, and automatic chip conveyer.　Our company can produce special products according to customers requirements! ? Specifications YKS5132B×3 /YKD5132B ? Max. diameter of external gear 320mm/220+D刀mm ? Max. module 8mm ? Max. face width 90mm ? Max. stroke length 100mm ? stroke number of gear shaping cutter 150-1250stroke/min ? Adjusting amount of stroke of cutter 30mm ? Rotary feed 0.0-2mm/ stroke ? Radial feed 0.005-0.5mm/ stroke ? cutter relieving 0.3m