MAS-2 的 english.docVIP

CONTENT Technical Specification Features Technical Requirement and Parameters Hardware Configuration Software Configuration and Function Specification Software Structure Self-test Function Recovery Function Communication Protocol between MAS-2 and Supervision System Operation Maintenance 1. Debug Outlines and Site Operation 2. Maintenance 3. Structure and Design Operation Specification Software Operation Specification Whole Unit Operation Specification Device Structure, Wiring Arrangement and Theoretical Figure Technical Specification 1. Features MAS-2 series microprocessor-based automatic quasi-synchronization control device is an intelligent device, the core of which is a single-chip Intel 80C196. Matched with high precision AC transmitter, AC sampling and rigorous calculation technology, it can accurately calculate the differences of the voltage, frequency and phase angle of the breaker on both sides. The I/O circuit is isolated photo-electronically. The high-speed sealed relay is adopted in the switching-in output and synchronic voltage switch. The anti-interference ability of the device is powerful, and the technology is advanced. Depend on automatic regulation of speed and voltage of the generator which is waiting for paralleled in grid to realize the automatic track of the frequency and voltage, thus to make fgfs and to get frequency difference and voltage difference into quasi-synchronization switching-in permission area rapidly. The phase angle difference is measured every half industrial period. The switching-in pulse is sent out whenθ=θdq=Δω*Tdq+Δω’*Tdq*Tdq/2, i.e. T=Tdq, to realize synchro-switching-in with lightening speed. The frequency regulation pulse will also be sent out to shorten the parallel procedure if the frequency is the same and voltage is different. On account of calculating the angular velocity(Δω) and angular acceleration(Δω’), the difference of phase angle θ approximates to 0 in the switching-in moment. Freq