大学毕业设计论文-小型雕刻机设计.docVIP

小型雕刻机 摘 要 机电一体化综合了机械、电子、自动控制、信息、传感器、电力电子、信号变换接口和软件编程等技术，并且这些技术，是。小型雕刻机是机电一体化产品，在工艺品制作生产行业有较大的市场。分析国内雕刻机的特点雕刻机的功能和使用范围了雕刻机的布局，主运动和进给运动结构，过程，实现。 本设计小型雕刻机，其精度高，一致性好应用领域广泛工艺品雕刻加工，功能。 关键词 雕刻机；；机电一体化 Small ngraving Machine Design Abstract Mechatronics combines mechanics, electronics, automatic control, information, sensors, power electronics, signal conversion interface and software programming techniques, and these versatile technologies integrated together, combined into a whole, is now Machinery Industrial Technology must develop will become the mainstream of development at home and abroad. Small engraving machine is a kind of typical in this environment produces mechatronic products, handicraft production and production industry has a larger market. The issue by analyzing the gap between domestic engraving machine and foreign engraving machine as well as their characteristics, defines the function and use of engraving machine, planning the structure and layout engraving machine, detailed design of the spindle movement and X, Y direction feed motion structure , and an auxiliary table structure, support columns, etc., and on this basis, it elaborated engraving machine movement to achieve its function. This design of small engraving machine, which has a high accuracy, consistency, and a multi-purpose machine, which is widely applied in the field, can be used to carving crafts processing, but also has milling and drilling functions. Keywords Engraving machine, servo motor, mechatronics 目 录 摘要 I Abstract II 第1章 绪论 1 1.1 课题背景 1 1.2 小型雕刻机及其发展现状 2 1.2.1 小型雕刻机的概念 2 1.2.2 小型雕刻机的应用和发展 3 1.2.3 小型雕刻机的特点 3 1.2.4 研究雕刻机的目的和意义 4 1.3 本章小结 4 第2章 雕刻机的结构设计 5 2.1 雕刻机的系统组成 5 2.2 雕刻机的整体布局 5 2.3 进给结构 8 2.4 主轴结构 12 2.5 支撑结构 13 2.5.1 支架设计 13 2.5.2 工作台设计 14 2.5.3 底座设计 15 2.6 本章小结 15 第3章 小型雕刻机的关键参数计算 16 3.1 设计指标 16 3.2 切削力、扭矩和功率的计算 17 3.3 进给运动的计算 20 3.3.1 滚珠丝杠副的计算 20 3.3.2 滚珠丝杠的计算 22 3.3.3 工作台电机的选择 24 3.4 本章小结 26 结论 27 致谢 28 参考文献 29 附录 31  绪论 课题背景 机器雕刻，发展小型机器。 我国小型雕刻机，小型雕刻机我