ppt课件-stage- discharge relations basic concepts- u s g s（阶段,放电- u g年代基本概念的关系）.pptVIP

How do I figure out what the scale offset is for an existing rating? Method 1 – G = g.h. at bottom (beginning) of log cycle N = 0.01 if the cycle is measuring hundredths of a foot, 0.1 cycle is measuring tenths of a foot, and so forth. e = offset = G-N Method 2 – Select one complete log cycle on the gage-height scale and pick off the upper and lower values of gage height. e = offset = ((10 x lower value) – upper value)/9 The shape of the curve can tell you if the offset is too high or too low Gage height Discharge e = 2 e = 0 e = 1 How to select the correct offset Johnson’s method Compute m