ppt课件-the evaluationof steel conduitand e m tas equipment（evaluationof钢铁conduitand e m助教设备）.pptVIP

* * * The Code requires verification that the EGC provides a low impedance path in the event of a ground fault. If a ground fault occurs there must be sufficient current to cause the overcurrent device to trip in a timely fashion. The GEMI software offers a solution for verify that requirement has been met. * * These two tables were prepared by Richard Loyd, consultant to the steel tube industry and co-trainer at Georgia Tech GEMI seminars, using the GEMI software. They are examples of some common circuit types. The tables first appeared in the 1996 NEC Handbook. They have been used in