CD130变速箱箱体加工工艺及夹具设计【毕业论文+CAD图纸全套】.doc

XX学院 毕业设计（论文） 题目： 系 别： 专 业： 机械设计制造及其自动化 学 生 姓 名： 学 号： 起 迄 日 期: 设计(论文)地点: 指 导 教 师: 专业教研室负责人: 日期: 2014 年 月 日 摘 要 本文是在CD130变速箱箱体的图样分析后进行CD130变速箱箱体的机械加工工艺路线的设计，同时按照其中的加工工序的要求设计夹具。 CD130变速箱箱体的主要加工内容是表面和孔。其加工路线长，加工时间多，加工成本高，零件的加工精度要求也高。按照机械加工工艺要求，遵循先面后孔的原则，并将孔与平面的加工明确划分成粗加工和精加工阶段以保证加工精度。基准选择以底面作为粗基准，以底面与两个工艺孔作为精基准，确定了其加工的工艺路线和加工中所需要的各种工艺参数。 在零件的夹具设计中，主要是根据零件加工工序要求，分析应限的自由度数，进而根据零件的表面特征选定定位元件，再分析所选定位元件能否限定应限自由度。确定了定位元件后还需要选择夹紧元件，最后就是确定专用夹具的结构形式。 关键词:CD130变速箱箱体；加工工艺；工序；专用夹具 Abstract This is the case in the headstock pattern analysis cabinet after machining process route design, while manufacturing processes in accordance with one of the requirements of the design fixture. The main spindle box casing surface and hole machining content. Processing route, processing time, higher processing costs, machining accuracy requirements are also higher. In accordance with the machining process requirements, and follow the principles of the first surface after hole, and the hole with a flat-screen processing is clearly divided into roughing and finishing stages to ensure accuracy. Reference selection to the bottom as a crude benchmark, the bottom two technical hole as a fine basis, determine the route of its processing technology and processing needs of the various process parameters. In the parts fixture design, parts processing operations requirements, analysis should be limited to the number of degrees of freedom, and then selected according to the parts of the surface characteristics of the positioning element, and then analysis whether the selected positioning element should be limited degrees of freedom. Positioning element also need to choose the clamping element, the final step is to determine the structure of the special fixture. Key words: Headstock; processing; process; special fixtures  目 录 摘 要 II Abstract III 目 录 1 1 绪论 3 1.1 本课题的研究内容和意义 3 1.2 国内外的发展概况 4 1.3 本课题应达到的要求 5 2 CD130变速箱箱体的图样分析 5 2.1 CD130变速箱箱体的作用 5 2.2 CD130变速箱箱体