棒料自动切割装置设计【毕业论文+CAD图纸全套】.doc

编号： 桂林电子科技大学信息科技学院 毕业设计(论文) 题 目：棒料自动切割装置设计 院 （系）： 专 业： 学生姓名：学 号： 指导教师单位： 姓 名：职 称：摘要本次设计是对的设计。主要包括:传动系统的设计、系统的设计、系统的设计这次毕业设计对设计工作的基本技能的训练，提高了分析和解决工程技术问题的能力，并为进行一般机械的设计创造了一定条件关键词：滚珠丝杠Abstract This design is the design of assembly of rod material automatic cutting device. Here mainly include: design, drive system design of the cutting blade clamping spindle parts of system design, part of the system of graduation design on the design of the basic skills training, enhancing the analysis and to solve engineering problems, and create a certain condition for general mechanical design. The structure is mainly produced by the motor power through the coupling will need to transfer the power to the screw rod, the screw rod drives the screw rod nut, thereby driving the movement, improve labor productivity and automation level of production. But also show its superiority, there are broad prospects for the development. The research of this thesis: (1) the overall structure design of automatic assembly device for cutting bar. (2) analysis of assembly device performance of rod material automatic cutting. (3) the choice of motor. (4) transmission system, execution unit and frame design of automatic assembly device for cutting bar. (5) the design of components for the design calculation and check. (6) to draw the assembly drawing and parts assembly diagram and parts diagram design. Keywords: automatic cutting assembly device, bar coupling, ball screw 目 录 摘 要 II Abstract III 目 录 IV 1 绪论 1 1.1棒料自动切割切割机的研究目的及意义 1 1.1.1棒料自动切割切割机背景 1 1.1.2意义 1 1.2研究现状及发展趋势 1 1.3本课题研究的内容及方法 2 1.3.1主要的研究内容 2 1.3.2设计要求 3 1.3.3关键的技术问题 3 2 棒料自动切割装配装置总体结构设计 4 2.1设计的要求与数据 4 2.2 同步带传动计算 5 2.2.1 同步带计算选型 5 2.2.2 同步带的主要参数（结构部分） 8 2.2.3 同步带的设计 10 2.2.4 同步带轮的设计 10 2.3 夹紧装置设计 11 3 X结构及传动设计 13 3.1 X向滚珠丝杆副的选择 14 3.1.1导程确定 14 3.1.2确定丝杆的等效转速 14 3.1.3估计工作台质量及负重 14 3.1.4确定丝杆的等效负载 14 3.1.5确定丝杆所受的最大动载荷 15 3.1.6精度的