蓝宝石切割机装置的设计【毕业论文+CAD图纸全套】.doc

编号： 毕业设计(论文) 题 目： 蓝宝石切割机装置的设计 所在学院 专 业 班 级 姓 名 学 号 指导老师 年 月 日 摘要本次设计是对的设计。主要包括:传动系统的设计、系统的设计、系统的设计这次毕业设计对设计工作的基本技能的训练，提高了分析和解决工程技术问题的能力，并为进行一般机械的设计创造了一定条件关键词：滚珠丝杠Abstract This design is the design of assembly of rod material automatic cutting device. Here mainly include: design, drive system design of the cutting blade clamping spindle parts of system design, part of the system of graduation design on the design of the basic skills training, enhancing the analysis and to solve engineering problems, and create a certain condition for general mechanical design. The structure is mainly produced by the motor power through the coupling will need to transfer the power to the screw rod, the screw rod drives the screw rod nut, thereby driving the movement, improve labor productivity and automation level of production. But also show its superiority, there are broad prospects for the development. The research of this thesis: (1) the overall structure design of automatic assembly device for cutting bar. (2) analysis of assembly device performance of rod material automatic cutting. (3) the choice of motor. (4) transmission system, execution unit and frame design of automatic assembly device for cutting bar. (5) the design of components for the design calculation and check. (6) to draw the assembly drawing and parts assembly diagram and parts diagram design. Keywords: automatic cutting assembly device, bar coupling, ball screw 目 录 摘 要 II Abstract III 1 绪论 1 1.1蓝宝石切割机的研究现状 1 1.2蓝宝石切割机发展趋势 2 1.3本课题研究的内容及方法 3 1.3.1主要的研究内容 3 1.3.2设计要求 3 1.3.3关键的技术问题 3 2 蓝宝石切割机装置总体结构设计 4 2.1设计的要求与数据 4 2.2 带锯选型 4 2.3 夹紧装置设计 5 2.4 卡盘的选型 6 2.5 同步带传动计算 6 2.5.1 同步带计算选型 6 2.5.2 同步带的主要参数（结构部分） 10 2.5.3 同步带的设计 12 2.6 轴的设计 12 2.6.1求作用在带锯上的力 13 2.6.2 初步确定轴的最小直径 13 2.6.3 轴的结构设计 14 2.6.4 求轴上的载荷 15 2.6.5按弯曲扭转合成应力校核轴的强度 16 2.6.6精确校核轴的疲劳强度 17 2.7 键的选择与校核 20 2.8滚动轴承的寿命校核 22 3 蓝宝石切割X方向进给传动设计 23 3.1 X向滚珠丝杆副的选择 24 3.1.1导程确定 24 3.1.2确定丝杆的等效转速 24