ppt课件-control outputwith lab v i e w- mechanical engineering（控制outputwith实验室v e w -机械工程）.pptVIP

Turntable Control Application DEMO Application 2 Using LabVIEW with advanced NI hardware. In this example we want to send simple commands to control the speed of a stepper motor. We will use a PCI-card in the PC, a “smart” encoder/motor power board, and LabVIEW software. Demo Application 2 stepper Coil wires SCXI cable PCI-card LabVIEW Control VI Demo Application 3 Use LabVIEW to send commands and receive data from a balance. In this case we have no DAQ or PCI cards We can only use the PC’s serial port to “talk” to the balance. PC Demo App 3: Balance vi To use a “stand-alone” instrument like