(表格索引.docVIP

索引 共用类交工技术文件格式 表H-101 化工工业工程建设交工技术文件 Technical documents for hand-over of engineering construction of chemical industry 表H-102 交工文件总目录 General contents of project hand-over documents 表H-103 交工文件总目录 Contents of project hand-over documents 表H-104开工报告 Report for start of construction 表H-105 中间交接证书 Certificate for intermediate acceptance 表H-106 联动试车合格证书 Certificate for qualification of system simulation test-run 表H-107 工程交接证书 Certificate for acceptance of engineering project 表H-108 工程备忘录 Memorandum for engineering project 表H-109 技术联系单 Technical liaison sheet 表H-110 隐蔽工程记录 Concealed work records 表H-111 基础沉降测量记录 Foundation settlement surveying records 表H-112 焊工登记表 Welder registration table 表Ha-112焊工登记表（改） 表H-113焊接记录表 Welding records 表H-114焊缝射线探伤报告 Radiographic test report of weld 表H-115 超声波探伤报告 Supersonic test report 表H-116渗透探伤报告 Penetrant test report 表H-117磁粉探伤报告 Magnetic powder inspection report 表H-118热处理报告 Heat-treatment report 表H-119超声波测厚报告 supersonic pachometer report 表H-120光谱分析报告 Spectrum analysis report 表H-121金相检验报告 Metall ographic examination report 表H-122材料性能试验报告 Test report for material properties 表H-123化学分析试验报告 Test report for chemical analysis 表H-124 分析报告 Analysis report for 表H-125 防腐蚀施工工序质量控制表 Quality control table for construction procedures of anti-corrosion work 表H-126防腐层电火花检测报告 Electric spark test report of anti-corrosion layer 表H-127绝热施工工序质量控制表 Quality control table for construction procedures of heat-insulation 表H-128空白表 机械类交工技术文件格式 表H-201 机泵安装工序质量控制表 Quality control table for machine and pump installing procedures 表H-202 机组安装工序质量控制表 Quality control table for machine set installing procedures 表H-203机组安装找正记录 Alignment record for installation of machine set 表H-204大型机械灌浆前检查记录 Inspection record before grouting of large machinery 表H-205机器拆检及组装间隙测量记录 Clearance measurement record for disassembling,inspection and assembling of machine 表H-206电机空气间隙测量记录 Air gap measurement record for motor 表H-207机组对中记录 Alignment record of machine set 表H-208