反击式破碎机打印版..doc

Φ1000×700反击式破碎机设计 摘　要 本设计为规格反击式破碎机的设计，主要研究内容：转子的机构设计；板锤的结构设计；板锤的固定方法。 本设计由转子型号入手，参考PF1007反击式破碎机的相关参数，初步确定转子的转速，从而确定线速度、板锤大小、数量等相关数据。 在主要零部件的设计中，主要包括带轮的设计计算、轴的结构设计、轴承的选择、转子部件的设计计算、板锤的结构和固定、破碎腔的设计和反击装置的设计计算等，其中最重要的就是转子部件的设计和板锤的设计及固定方法。为了增加转子的刚度，转子体采用ZG340材料，并整体铸造。板锤采用螺栓固定，并使用新型材质以提高其耐磨性和利用率。 本设计整体在PF1007型号的反击式破碎机基础上更进一步提高其破碎性能，结构简单、重量轻、外形尺寸小、设备费用低、运转安全、操作方便、便于维修和管理。 关键词：反击式破碎机，研究内容，结构，计算 ?1000×700 CRUSHER ROTOR DESIGN ABSTRACT The specification of the design is impact crusher design, and it mainly contents: the institutional design of the rotor; plate hammer structural design; plate fixation hammer. The design starts from the specifications of the rotor, and it references the relevant parameters of PF1007 crusher. Initially it sets the rotor speed, so that I can design the board hammer size, number and other relevant data with the rotor speed. The design of the main components includes pulley design calculation, the structural design of shaft, bearing selection, design and calculation of the rotor components, board structure and a fixed hammer, crushing chamber design and the design of computing counter devices and so on. One of the most important part is the rotor design and board design and the fixed method of hammer. In order to increase the stiffness of the rotor, the rotor body is combined with ZG340 material, and it casts with the whole body. Board hammer is fixed with bolts, and use of new materials could enhance their wear resistance and utilization. The overall design further improves its crush performance which is based on the impact crusher of the PF1007 model. Moreover, it exits advantages such as simple structure, light weight, small dimensions, low cost of equipment, operation safety, convenient operation, easy maintenance and management. KEY WORDS：Impact Crusher, content, structure, calculation 目　录 前　言 1 第1章 反击式破碎机概述 2 1.1 反击式破碎机分类 2 1.2 反击式破碎机型号表示方法 2 1.3 反击式破碎机机型及性能 2 1.3.1 PF系列反击式破碎机 2 1.3.2 PFY硬岩反击式破碎机 2 1.3.3 PFQ型涡旋强力反击式破碎机 3