安全孔板(F(Z))在控制阀失败工况下的应用..docVIP

安全孔板（F(Z)）在控制阀失败工况下的应用 摘要：This paper mainly introduces a practical, simple and reliable design method, making the orifice plate and control valve in series, which is used for PSV relief load calculation of control valve failure scenario, which is called safety orifice F (Z). By safety orifice F (Z), the relief load of PSV and the load of the flare system are reduced, investment is saved; And during control valve failure, the relief load of PSV is not affected by control valve. 关键词: 安全孔板；控制阀失败；安全阀；泄放量 在工程设计中，我们总是想降低安全阀的泄放量，从而来减小安全阀系统的尺寸，包括进出口管线，来降低投资，甚至来降低火炬系统的负荷。降低安全阀泄放量的措施有很多，针对不同的泄放工况其采