基于SystemView的数字频带传输系统的仿真重点.doc

2016屆本科畢業設計 題目： 基於SystemView的數位頻帶傳輸系統的模擬 Title: Simulation of digital frequency band transmission system based on SystemView 院系名稱： 學生姓名： 學生學號： 專 業： 指導老師： 完成時間： 摘 要 現階段，隨著資訊的交換日益頻繁，通信技術已成為促進社會發展的強大動力。對於通信技術而言，通信品質的好壞對於資訊傳遞至關重要。相對於類比通信系統，數位通信系統在此方面具有更多的優點。為了使基帶信號的功率譜搬移到較高的載波頻率上和實現遠距離傳輸通信，我們通常採用三種方法進行數位調製：相移鍵控（PSK）、頻移鍵控（FSK）和幅移鍵控（ASK）。 本次課程設計利用SystemView軟體主要研究2 ASK、2 FSK、2 PSK、4 FSK通信系統。在發送端，產生了調製信號，通道考慮了加性高斯白色雜訊通道，接收端採用解調器解調。利用Sink庫顯示模組顯示了系統中的標誌性波形，並利用SystemView 的分析功能求出各標誌性信號的頻譜並予以顯示，觀察模擬結果並分析。經過運行調試，實現了預定的設計目的。 關鍵字：數位通信系統，調製解調，SystemView5 Abstract At this stage, with the frequent exchange of information, communication technology has become a powerful driving force for the promotion of social development. For the communication technology, the quality of communication is very important for the transmission of information. Comparing with the analog communication system, the digital communication system has more advantages in this aspect. In order to make the baseband signal power spectrum shifting to higher carrier frequency and realize the long distance communication, we usually adopt three kinds of methods of digital modulation: phase shift keying (PSK), frequency shift keying (FSK) and amplitude shift keying (ASK). This design used by SystemView software mainly include 2 ASK, 2 FSK, 2 PSK, 4 FSK communication system. The modulation signal channel is generated on the sending side ,and demodulator is used on the receiving side to restore signal, as well as considering the channel with the additive Gauss white noise channel, The Sink display module is used to display the signal waveform in the system, and the spectrum of each signal is obtained by using the analysis function of SystemView, So the simulation results can be observed and analyzed.After debugging the design, the results show the predetermined aim is achieved. Keywords: The digital communication sys