北京bj1041整体式驱动桥设计大学毕业设计.docVIP

本科学生毕业设计 驱动桥设计 院系名称： 汽车 专业班级： 车辆B07-1班 学生姓名： 指导教师： 职 称： 黑 龙 江 工 程 学 院 二年六月  The Graduation Design for Bachelors Degree Design Axle Candidate：Specialty：Vehicle　Engineering　 Class：B0-1 Supervisor：. Bao Yu Heilongjiang Institute of Technology 2011-06·Harbin 摘 要 主减速器、差速器、半轴及桥壳四部分组成，此外，还要承受作用于路面和车架或车厢之间的铅垂力、纵向力和横向力。 桥壳采用的设计桥壳工作。 关键词：驱动桥主减速器差速器半轴桥壳 ABSTRACT Drive axle assembly is an important vehicle components and an important bearing in the vehicle assembly parts, so drive axle of a direct impact on overall vehicle performance and component life.Drive axle from the final drive, differential, axle and axle housing of four parts, the basic skills by using a spin-down twist, the engines power passed to the left and right wheels, and to ensure the car when the steering wheel left and right differential function, in addition, but also act on the road and bear the car frame or between the vertical force, vertical force and lateral force.Discusses the design of the first drive axle of the overall structure of the analysis of the drive axle of the structure and determine the advantages and disadvantages of design options: with integral drive axle, main reducer reducer reducer type single stage, the main spiral bevel gear reducer gears, planetary gear differential with conical differential, axle with full floating type, with cast axle Integral axle.The design was completed for a single-stage reducer, planetary gear differential cone, full floating axle half shaft design and Check and material selection and so on. Keywords: Integral; Drive Axle; Final Drive; Differential; Axle; Drive Axle Housing  目 录 摘要 I II 第 1 1.1 设计目的及意义 1 1.2 国内外驱动桥研究状况 1 1.3 设计主要内容 3 驱动桥的总体方案确定 4 2.1驱动桥的种类结构和设计要求 4 2.1.1汽车车桥的种类 4 2.1.2驱动桥的种类 4 2.1.3驱动桥结构组成 4 2.1.4 驱动桥设计要求 5 2.2 设计车型主要参数 5 2.3主减速器结构方案的确定 2.3.1 主减速器的齿轮类型 5 2.3.2 主减速器的减速形式 7 2.3.3 主减速器主从动锥齿轮的支承形式及安装方法 2.4 差