单片机实验环境的熟悉.docVIP

单片机技术及应用实验报告实验名称：?、 实验目的 #includeREG52.h sbit key=P2^0; void main(void) { unsigned char x; x=1; while(1) { P1=~x; x=x1; while(key); while(!key); if(x128) continue; else { P1=~x; while(key); while(!key); x=1; } } } 2总线和虚拟仪器 #includeREG52.H #includestdio.h #define uchar unsigned char sbit pulse_in=P1^1; sbit pulse_out=P2^0; void initUart(); void main() { unsigned char i,j; i=0; j=0; initUart(); while(1) { P2=i; while(!pulse_in); pulse_out=0; while(pulse_in); i++; P2=i; while(!pulse_in); pulse_out=1; while(pulse_in); i++; j++; printf(current data-out of port: 0%BX\n,j); } } void initUart(void) { SCON=0X50; RCAP2H=(65536-(3456/96))/256; RCAP2L=(65536-(3456/96))%256; T2CON=0X34; TI=1; } 3绘制子电路 #includeREG52.H #define PORT_OUT P1 #define PORT_IN P2 unsigned char state[8]={0x01,0x03,0x07,0x0f,0x1f,0x3f,0x7f,0xff,}; void main(void) { unsigned char i; while(1) { i=~PORT_IN; switch(i) { case 1: PORT_OUT=~state[0];break; case 2: PORT_OUT=~state[1];break; case 4: PORT_OUT=~state[2];break; case 8: PORT_OUT=~state[3];break; case 16: PORT_OUT=~state[4];break; case 32: PORT_OUT=~state[5];break; case 64: PORT_OUT=~state[6];break; case 128: PORT_OUT=~state[7];break; default:PORT_OUT =0xff;break; } while(i==~PORT_IN||PORT_IN==0xff); } } 4模块元器件设计 #include REGX52.H #include stdio.h #include intrins.h #include Absacc.h #include string.h #include ctype.h #define byte unsigned char #define uchar unsigned char #define word unsigned int #define uint unsigned int #define ulong unsigned long #define BYTE unsigned char #define WORD unsigned int #define TRUE 1 #define FALSE 0 #define PORT_OUT P2 #define LE P2_6 #define OE P3_6 #define YELLOW_1 P2_1 #define YELLOW_2 P2_4 unsigned char state[5]={0x36,0x33,0x35,0x1e,0x2e}; void initUart(void); void time(unsigned int ucMs); void main(void) { unsigned char counter=0x0; int times=2000; initUa