磨床plc控制系统设计本科毕业设计.docVIP

本科生毕业设计（论文） 题 目： 磨床PLC控制系统设计 姓 名： 学 号： 学 院： 电气工程与自动化学院 专 业： 电气工程与自动化（电气方向） 年 级： 指导教师： （签名） 20XX年 6 月 1 日磨床PLC控制系统设计 摘 要 磨床是利用磨具对工件表面进行磨削加工的机床。利用PLC控制磨床运行，使线路得到简化，可靠性提高，响应速度明显加快，精确度更准确实现了磨床启动、停止、故障停止、紧急停止的功能，可根据运行要求灵活切换磨床的控制方式；提供过载，轻载，断相和电压不平衡保护；现场显示运行状态，实现智能化监控。节省大量的继电器元件,使机床的工作效率更高。Grinding Machine PLC Control System Design ABSTRACT The grinder is the use of abrasive on the workpiece surface grinding machine tool. Plain grinding machine electrical system from the hydraulic system, the grinding heel, cooling pump and electromagnetic sucker and lighting circuit part. In modern industrial production efficiency with rising, grinder in the processing precision, automation, such as processing intensive requirements continue to increase, the traditional grinding machine can not meet the requirements of modern processing technology. In traditional grinding in control using a relay - contactor electrical control system is too complicated, and because the contact number, high failure rate, low reliability, large volume and other shortcomings, are gradually being phased out. PLC is the computer technology and traditional relay contact control technology combined with the product, it has overcome the relay contact control system in mechanical contact of the complex wiring, low reliability, high power consumption, universality and flexibility of the shortcomings of the poor, make full use of the advantages of a microprocessor. Use of PLC control grinding machine running, so the circuit is simplified, improved reliability, response speed to be accelerated apparently, the accuracy is more accurate; the grinder start, stop, failure to stop, emergency stop function, be under the operational requirements of the control switch grinder flexible; with light load, overload, open phase