自动涂胶工作台的设计（机械cad图纸）学士学位论文.docVIP

摘 要 涂胶机又称刮胶机.用以将胶浆涂在纺织品的表面上的一种机械设备.主要有:(1)卧式涂胶机或双作用涂胶机.纺织品通过涂胶刀和工作辊之间的狭缝,涂上一层薄膜,再通过用蒸汽加热的平台,使溶剂挥发而剩余胶层.(2)鼓式涂胶机.有一个用蒸汽加热的中空金属鼓代替干燥台.(3)立式或倾斜式浸浆机.纺织品浸过胶浆后,表面上过量的胶浆被涂刀和压紧辊刮去.再经过立式或倾斜式干燥台使溶剂挥发而剩余胶层.（4）桌面涂胶机是通过气压将胶水或者油漆等涂料喷涂到材料上。设备采用了三轴联动，自动化操作，同时配有电脑编程控制路径喷涂。喷涂厚度和时间均可设定，简单易操作。 涂胶机时机器代替人工的一种应用，在行业中还被称做自动喷涂机、自动喷胶机、喷胶机等。 关键词：涂胶；自动涂胶机；三轴联动  Abstract Coating machine is also called the scraping gum machine. To mucilage besmear is on textiles on the surface of a mechanical equipment. Mainly include: (1) the horizontal coating machine or double-acting glue machine. Textiles by coating knife and slit between the work roll, coated with a layer of thin film, again by using steam heating platform, make the solvent evaporation and the remaining sub. (2) drum coating machine. There is a steam heating hollow metal drum drying machine instead. (3) vertical or tilting leaching pulp machine. Textiles after immersion mucilage, on the surface excess mucilage by knife and compaction roller away. Again after vertical or tilting make solvent evaporation and the rest of the rubber drying. (4) coating machine is through the pneumatic desktop will glue or paint coating to the material. Equipment used the three-axis linkage, automatic operation, equipped with computer programming control path spraying at the same time. Coating thickness and time can be set, simple easy to operate. An application of the coating machine instead of manual machine, also called in the industry automatic spraying machine, automatic glue machine, glue machine, etc. Key words: gumming ；automatic glue machine； Three-axis linkage  目 录 摘 要 1 Abstract 2 目 录 3 第一章 绪论 6 第二章 自动涂胶工作台的课题简介 7 2.1课题简介 7 2.2、设计要求 7 2.3课题的主要技术参数 7 第三章 自动涂胶工作台的方案拟定 9 3.1自动涂胶工作台的总体布局 9 3.1.1自动涂胶工作台的组成 9 3.1.2自动涂胶工作台动作循环的方案拟定 9 3.1.3总体布局 10 3.2移动装置的方案拟定 10 3.2.1产品转动的驱动方式 10 3.2.2电机的选择 10 3.2.3 电机的安装方式 13 3.2.4工作台的结构设计 15 3.2.5工作台的驱动方式 15 3.2.6气缸的选择 15 3.2.7工作台的导向 17 3.3涂胶装置的方案拟定 17 3.3.1涂胶头的结构设计 17 3.3.2涂胶装置的运动方案 18 3.3.3气缸的选择 19 3.3.4点胶装置的示意图和气缸