pic单片机chap.pptVIP

principle of PIC MCU and its application Chapter 3 ? system integration * 3.1 Reset The Reset module includes all the reset sources and controls the main reset signal SYSRST .All the reset sources are as follows: . POR：Power-on Reset. When detecting the VDD voltage rise, it will generate internal Power-on Reset pulse, which produces 10 μs delay to make sure that internal device bias circuits are stable. . EXTR：Pin Reset (MCLR). If MCLR is low level, input pulse is longer than the set minimum width . When CLR is released, SYSRST will generate in the next instruction clock cycle, then start