Process of Mirror film covering with hardcoat film V培训教程文件.pptVIP

Process of Mirror film covering with ANTI-SCRATCH hard coat film  Equipment and materials Process Map Process Process Process Inspection and Judgment Cutting and packing Manual laminator;- Akebono;- Deionizer;- Dust removal adhesive;- Sheets of DBEF-A2 (350mm x 300m format);- Hard coat PET50 (roll format, 330mm x 200m);- L7726 premask (roll format);- Dummy premask (Premask for BEFIII-T); Laminate L7726 premask over hard coat PET50 Release top liner from DBEF-A2 mirror film Laminate hard coat PET 50 with L7726 premask on DBEF-A2 mirror film Release adhesive side liner from hard coat PET50 Cut in form of master sheets Laminate L7726 premask over hard coat PET50 by Akebono Roller L7726 Hard coat PET 50 Hard coat PET 50 with L7726 Adhesive side faces up Laminate hard coat PET 50 with L7726 premask on DBEF-A2 mirror film by manual laminator Dummy film DBEF-A2 DBEF-A2 DBEF-A2 Hard coat PET50 with L7726 Hard coat PET50 with L7726 DBEF-A2 Remove adhesive side liner Dummy film Remove top liner Non-adhesive side faces up (i) Cut in form of master sheets (ii) Remove bottom dummy film then Weed out 4-sides premasks (iii) Semi-finished products will be inspected by room light NG Defect type: Only Bubbles formed in between DBEF-A2 and hard coat PET by lamination process. And, Ignore craters on DBEF-A2 adhesive layer - Defect size: 1.0 mm are acceptable- Inspection and judgment: Transmitted room light - Action: Circle the defect as proper size and ship the goods to HK for split and final packing Inspected semi-products will be shipped to HK.- Cutting and packing processes will be launched in HK. Packing New construction Protective release liner 44 microns Adhesive 25 microns DBEF: (multi-layer structure) 108 microns Hard coat PET 50 microns Protective liner 58 microns Adhesive 25 microns Delivery thickness = 310 microns Applied thickness = 208 microns * *