TDC离线水清洗机电子档培训教程文件.pptVIP

Presentation KEENTEC DESIGNED PCB Cleaning machine manufacture: In line Aqueous Cleaners/在线水清洗机 Batch Aqueous Cleaners/离线水清洗机 Wave Soldering machines/波峰焊锡机 In line Aquesous Cleaners About TDC: /关于TDC Batch Aquesous Cleaners Wave solder from DEKTEC Complete Demonstration Facility/美国制造工厂与展示厅 Applications Lab for Soldering and Cleaning/提供各种焊接或清洗方案的实验 Custom engineering and manufacturing/滿足客户定制化的设计与制造 Service Center/服务中心 Global Sales Service Locations 全球销售与服务区域 Asia Europe Mexico Manufacturing Facility :Technical Devices has a 300,000 sq. ft. manufacturing plant equipped with a Thermwood Router and Fadal Machining Center 制造条件: TDC拥有30万平方英尺的工厂面积,配有顶级的Thermwood Router及Fadal 加工中心. Technical Devices’ Customers/TDC部份荣誉客户 离线清洗机 Nu/Clean AquaBatch JR 离线清洗机 Nu/Clean AquaBatch JR 离线清洗机 Nu/Clean AquaBatch XL 离线清洗流程概述 Chemistry 溶剂 Water DI水 Waste 废水 Chemical Wash: Fill Stage Water is pumped into the system from facilities source. At the same time chemistry is metered (0-30%) in from the semi-aqueous chemistry container housed in the lower compartment. 补液阶段: DI水被 泵到槽内, 同时一定比例的化学清洗剂也添加到槽内 1 1 1 Chemical Wash: Run Stage The mixed chemistry is pumped through the spray wands until the recipe defined wash temperature is met. At which point, the cycle time is started. 运行阶段: DI水与溶剂的混合体在温度达到设定值后被泵到清洗槽, 通过喷管及嘴开始清洗. 2 2 Chemical Wash: Drain Stage The spent wash solution is pumped into the facility waste through a pump assisted drain port. 排液: 把清洗完的清洗液排出 3 3 Rinse Aid Defoamer Dryer TDC AquaBatch Series: AquaBatch JR Process Diagram: Chemical Wash JR离线机----溶剂清洗步骤 TDC AquaBatch Series: AquaBatch XL Process Diagram: Chemical Wash XL离线机-----溶剂清洗步骤 Heated Holding Tank Rinse Aid Defoamer Water Waste Dryer Chemical Wash: Fill Stage The chemistry is pumped into the process chamber from the chemical holding tank located in the lower compartment. 补液阶段: 溶剂被从下方的容积槽内泵到清洗槽 1 1 Chemical Wash: Run Stage The mixed chemistry is pumped through the spray