SS67A快速固化的高强度粘接剂硅胶.doc

SS-67A 快速固化的剂 对本硅胶感兴趣，请与本文分享者联系High Strength Fast Cure Adhesive Sealant 产品描述 Product Description SS-67A是一种单组分、高强度、室温硫化的脱乙酸硅橡胶。它物理。固化后的弹性体可抵御气候、臭氧、潮湿、紫外线及高温。SS-67适用于手工操作及自动设备。 SS-67A is a fast curing, high strength, 1-part acetoxy silicone RTV adhesive rubber product engineered for applications requiring fast development of physical properties and excellent adhesion. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. SS-67A works well in manual and automatic dispensing equipment. 产品特点Product Features ?快速室温硫化Fast R.T. cure ?触变型膏剂 Thixotropic paste ?对塑料、金属和玻璃无需打底层就有极好的结合力 Excellent unprimed adhesion to plastic, metal and glass ?使用方便，加热可迅速固化 Convenient, heat accelerated instant cure capability 典型应用Typical Applications ?流水线粘接 ? Assembly line adhesive ?点胶工艺 Form in place gaskets ?粘接封闭剂 ? Adhesive Sealant 关于固化 Heat Accelerated Curing 通常在开放空间中施用后露置于环境湿度下固化即可形成高强度的橡胶。然而。热风可以大幅提高固化速度并立即实现粘接效果。一分钟热风吹送后再经一分钟湿度条件下冷却，即可固化并形成优异的粘接性能。 Typical utilization involves dispensing in open air and ambient humidity to result in a high strength adhesive rubber. However, cure speed can be accelerated with hot air to nearly instant cures exhibiting very fast adhesion. A one minute hot air stream exposure, followed by a one minute cool down in a humid environment, results in cured elastomer exhibiting outstanding adhesion. 性能参数 Typical Properties 固化前： 颜色： 半透明 黏度（厘泊）： 500,000 比重： 1.12 粘稠性： 触变型膏剂 生效时间（分，室温）： 4 表干时间（分，室温）： 12 挤出速率（0.62MPa下，克/分）： 250 （挤出孔径3mm） UNCURED Color Translucent Viscosity, cps 500,000 Specific Gravity 1.12 Consistency: thixotropic paste Working time, mins 4 Tack Free Time, mins. 12 Application Rate,90 PSI, g/min. 3mm orifice @ 0.6 MPa 250 固化后： 最高操作温度： 250℃ 拉伸强度 1000PSI/6.8