LightCycler480日常维护和保养.pptVIP

LightCycler? 480安装场地要求 LC480 UPS≥2500 VA 实验室温度：10 ± 5℃ 实验室湿度：20% - 80% 实验室配备有空调做温度及湿度的调控 实验室配备有良好的接地线 LightCycler? 480数据库备份 LightCycler? 480数据库备份 LightCycler? 480单次实验数据备份 LightCycler? 480单次实验数据备份 LightCycler? 480单次实验数据备份 LightCycler? 480仪器清洁 仪器表面的日常清理（75%酒精擦拭表面） 防尘布或者防尘罩保护仪器 电气安全 * LightCycler? 480日常维护与保养 罗氏应用科学部 可互换的热循环模块 自己动手DIY，快速方便 随机附送装载箱，便于更换模块 无需厂家工程师在场 无需重新校准 更换完毕后仪器自动检测并确认模块型号 LightCycler? 480：96孔模块与384孔模块互换 Exor4 数据库 选择 Backup Database 右击鼠标 选择D:\ 保存路径备份数据库（建议日常保存5个文件） 自动以操作日期存档 按照指定路径保存运行文件（包括所有 反应程序和数据以及分析结果等） 可以作为实验数据寻求技术支持 We Innovate Healthcare The LightCycler? 480 thermal block cycler is available for either 96- or 384-well plates; there are two catalog numbers for the instrument, depending on the block you need. Once installed, the block cycler is easily accessible and can be interchanged easily within minutes by users - without special training. This change also includes the block cycler cover (heated lied with pinholes). There is no requirement for an experienced service technician to do this. Each block cycler version is also available separately and comes in a specially designed loading help box. The upper part of the box is first placed next to the opened instrument; it can then accept the first block. The new block is inserted and the empty lower part of the box then used as the cover for the block that has just been removed. After changing block cyclers, the experiment can be continued without any time-consuming recalibration. The instrument automatically recognizes the new block cycler.