激光打印机工作原理.pptVIP

激光产品分类及适用机型  -By Bella 激光产品的分类及适用机型 一体式碳粉盒（HP系列，Canon系列） 填充碳粉（HP Laser jet ，Canon Laser jet系列） 分体式碳粉盒适用于Brother/Toshiba/Mita/Oki/Panasonic/Canon/Ricoh等系列） 打印机原理 1.0 充电Conditioning 2.0 写录 Writing 3.0 显影Developing 4.0 转印Transferring 5.0 定影Fusing 6.0 清洁Cleaning 7.0 放电Discharging 图像形成的第一步Image Formation Stage One: Conditioning (Charging) 通过电晕组件或充电辊给转动的感光表面充上一 层均匀的负电荷 Conditioning is to apply a uniform negative charge in the rotating Organic Photo-Conductor (OPC) drum surface via corona wire assembly or primary charge roller 图像第二步：写录（曝光）Image Formation Stage Two：Writing 携带数字信息的激光束扫描感光鼓表面，接受激光照射的鼓表面变为导体， 电荷消失，在鼓的表面形成了电位不一静电潜像。 In this stage, the laser beam with digital signal makes contact with the OPC drum surface. The exposed area becomes conductive and discharges the surface charge to round, forming a electric latent image on the drum surface. 图像形成第三步：显影Image Formation Stage Three: Developing 在显影区，感光鼓表面的静电潜像变为可视的碳粉图像。首先碳粉被吸引到磁辊表面。在出粉刀的控制下，在磁辊表面形成一特定厚度的均匀碳粉层，并通过摩擦使碳粉带电。在通过AC/DC偏压作用，使碳粉在磁辊表面震动，并转移到OPC上。OPC上的潜像区吸引碳粉，从面形成可见的碳粉图像。 Developing is to convert the electric latent image into visible toner image at the developing station. Toner is attracted onto the mag sleeve magnetically from the toner hopper, and charged via friction between the mag sleeve and the doctor blade. The doctor blade also evenly meters the toner amount on the mag sleeve. An AC/DC voltage give the toner a negative charge bias and transfers the toner to the OPC 图像形成等四步：转印Image Formation Stage Four：Transferring 携带碳粉图像的鼓转动，并与同样速度的纸相遇。转印辊给纸背面施以正的电压，使带负电的碳粉被吸引到纸上。 The drum with toned image rotates and contacts with the media that delivered by the delivery system at the same rate. An opposite charge is placed on the backside of paper by the transfer roller. The charge attracts the toner from the drum onto the media. 图像形成第五步：定影Image Formation Stage Five：Fusing 携带碳粉图像的纸进入定影组件，定影组件由一个加热辊和一个压力辊组成。成热和压力的作用下，碳粉粒子被溶进纸纤维中，形成我们所看到的打印稿。