通信与电子工程专业使用LabVIEW FPGA模块开发可编程自动化控制器毕业论文外文文献翻译及原文.doc

毕 业 设 计（论文） 外 文 文 献 翻 译 文献、资料中文题目：使用LabVIEW FPGA（现场可编程门阵列）模块开发可编程自动化控制器 文献、资料英文题目： 文献、资料来源： 文献、资料发表（出版）日期： 院 （部）： 专 业： 通信与电子工程 班 级： 姓 名： 学 号： 指导教师： 翻译日期： 2017.02.14 使用LabVIEW FPGA模块开发可编程自动化控制器 Building Programmable Automation Controllers with LabVIEW FPGA Overview Programmable Automation Controllers (PACs) are gaining acceptance within the industrial control market as the ideal solution for applications that require highly integrated analog and digital I/O, floating-point processing, and seamless connectivity to multiple processing nodes. National Instruments offers a variety of PAC solutions powered by one common software development environment, NI LabVIEW. With LabVIEW, you can build custom I/O interfaces for industrial applications using add-on software, such as the NI LabVIEW FPGA Module. With the LabVIEW FPGA Module and reconfigurable I/O (RIO) hardware, National Instruments delivers an intuitive, accessible solution for incorporating the flexibility and customizability of FPGA technology into industrial PAC systems. You can define the logic embedded in FPGA chips across the family of RIO hardware targets without knowing low-level hardware description languages (HDLs) or board-level hardware design details, as well as quickly define hardware for ultrahigh-speed control, customized timing and synchronization, low-level signal processing, and custom I/O with analog, digital, and counters within a single device. You also can integrate your custom NI RIO hardware with image acquisition and analysis, motion control, and industrial protocols, such as CAN and RS232, to rapidly prototype and implement a complete PAC system. Table of Contents Introduction NI RIO Hardware for PACs Building PACs with LabVIEW and the LabVIEW FPGA Module FPGA Development Flow Using NI SoftMotion to Create Custom Motion Controllers Applications Conclusion Introduction You can use graphical programming in LabVIEW and the LabVIEW FPGA Module to con