A340E自动变速器实验台说明书【毕业论文+CAD图纸全套】.doc

摘 要 自动变速器在汽车上的应用日益广泛，准确、快速、有效地检测自动变速器工作性能。目前，国外对汽车自动变速器工作性能的检测方法广泛采用的方法是实际装车路试，但从试验情况看，该方法费用高、周期长、要求高，而这些缺点恰恰无法满足教学的要求。为克服这些不足，实现在汽车专业教学中对自动变速器性能检测实现台架化是一个比较合理的选择。 主要是针对丰田A340E自动变速器进行展开，首先介绍了A340E自动变速器的、工作原理及。在此基础上，提出了一种以教学为目的的自动变速器实验台方案。针对它的教学目的，该实验台的特点是结构相对较为简单，实验台设有，便于在教学过程中，让学生直观了解并通过设置故障增强其动手能力，以达到良好的教学效果。 关键词：A340E自动变速器故障模拟及检测 ABSTRACT The development of electronic auto-control technology allows automatic transmission of the application in the car becomes more extensive, accurate, rapid and effective detection performance for the automatic transmission of power motor vehicles, economy and security is very important. At present, foreign automobile automatic transmission performance of the detection method is widely used in the actual loading of the road test, but from the test situation, the method of the high cost of long and demanding, which is precisely the shortcomings of teaching can not meet the requirements. To overcome these deficiencies, the achievement of professional teaching in the automotive automatic transmission performance testing on the bench is to achieve a more reasonable choice. The design is mainly directed against Toyota A340E automatic transmission to start, first of all introduced the A340E automatic transmissions internal structure, working principle and operation. On this basis, a teaching of the automatic transmission for the purpose of test-bed design. For the purpose of teaching it, the test-bed structure is characterized by relatively simple test-bed has a detection terminal and self-diagnostic interface to facilitate the process of teaching to enable students to understand and intuitive fault by setting the hands to strengthen their capacity in order to achieve good teaching effectiveness. Key words： A340E ；Automatic Transmission ；Test-bed ；Teaching；Fault simulation and test  目 录 I Abstract II 第1章 绪论 1 1.1研究的目的及意义 1 1.2 国内外研究现状 2 1.3 设计的主要内容 3 第2章 A340E自动变速器的结构和工作原理 4 2.1 A340E自动变速器的结构及工作原理 4 2.1.1 液力传动机构 4 2.2.