M3400调温器工艺规程设计和系列夹具设计【毕业论文+CAD图纸全套】.doc

摘 要 本次设计的主要内容包括M3400调温器工艺规程设计和系列夹具设计的两大方面。制定工艺规程设计的原始资料包括：零件图样及必须的装配图样，产品验收的质量标准，产品的年生产纲领和生产类型、毛坯图样等。制定工艺规程设计步骤如下：审查零件图样，对零件进行工艺分析，选择零件的毛坯、绘制毛坯图，工艺过程设计（包括定位基准的选择，零件表面加工方法的选择，加工顺序的安排，工序的组合），工序设计（包括机床设备及工装选择，工序间加工余量的确定，工序尺寸及公差的确定、切削用量的选择，时间定额的确定），技术经济分析，填写工艺文件。夹具设计必须满足的要求有：保证加工精度，夹具的总体方案应与年生产纲领相适应，安全、方便、减轻劳动强度，排屑顺畅，具有良好的强度、刚度和结构工艺性。夹具设计包括工件的定位，定位误差的分析与计算，夹紧机构的确定，夹具力的确定（包括方向，作用点和大小）。 关键词：工艺；夹具；加工；定位误差 Abstract The design of the main content includes M3400 thermostat process planning and design of fixture design series two aspects. Make the process planning original material including: pattern and the assembly parts must be pattern, the product quality acceptance of the standard, the product in the production program and production type, blank design, etc. For process planning design procedure is as follows: review parts design, analysis of the technology of parts, choose the blank, draw a blank parts graph, process design (including the locating datum, the selection of parts the selection of surface machining method, processing order the arrangement, the process of combination), process design (including machine tool equipment and fixtures choice, between the machining allowance process to determine the size, tolerance, process of sure, and selection of cutting parameter, time to determine the norm), technical and economic analysis, fill in process documents. Fixture design must meet the requirements for: ensure machining precision and the overall scheme of the fixture should be and years production program ADAPTS, safe, convenient, reduce labor intensity, scraps discharge smoothly, with good strength, stiffness and structure technology. Fixture design includes also the positioning, positioning error analysis and calculation, the determination of clamping institutions, fixture to determine the force (including direction, role of and size). It is the English translation of the Chinese abstract. Key words: handicraft; clamp; machining precision; position error