某拨叉零件加工工艺及其夹具设计【毕业论文+CAD图纸全套】.doc

摘 要 ：Abstract The present paper is combing the actual production at present, which is that either using universal fixture cannot meet only production requirements or using universal fixture clamping work-piece to product is poor efficiency and powerful labor and not high processing quality or often it need to increase crossed process, to specially design two fixture: milling fixture and drilling fixture, mainly including schemes of fixture positioning, clamping and cutter, the design of the concrete and the TAB folder and the analysis of machining precisionl. The milling fixture, having good processing precision and targeted, mainly is used to process dial the fork parts milling flutes. The fixture with clamping force device has the characteristics of efficiency and precision required by modern machine tools. It is so effectively to reduce the processing time and auxiliary time that greatly improve the labor productive, effectively reduce the labor intensity and increase the work efficiency as well. Drilling fixture is good for raising productivity, expanding machine machining scope, reducing labor intensity and ensuring the production safety. Therefore, it is especially important to learn and study the knowledge of fixture and design new suitable for practical production fixture nowadays. Key words：fixture；design；efficiency；increase  目 录 第一章 绪论…………………………………………………………………………… 1 1.1 夹具概念…………………………………………………………………………1 1.2 夹具的主要功能…………………………………………………………………1 1.3 夹具的分类………………………………………………………………………1 1.3.1 按夹具的通用特性分类…………………………………………………1 1.3.2 按夹具的动力源分类 ……………………………………………………2 1.4 夹具的组成………………………………………………………………………2 1.5 常用定位元件及选用……………………………………………………………3 1.5.1 工件以平面定位…………………………………………………………3 1.5.2 工件以外圆柱定位………………………………………………………3 1.5.3 工件以内孔定位…………………………………………………………3 1.6 机床夹具的现状及发展方向……………………………………………………4 1.6.1 机床夹具的现状…………………………………………………………4 1.6.2 机床夹具的发展方向…………………………