张紧轮注塑模具设计【毕业论文+CAD图纸全套】.doc

摘要的精度要不太高，所用材料为。模具采用一模件、型面、侧向抽芯结构  Abstract This Article passeses to piece viability assessment for request for of shape, size and its accuracy coming proceeding injecting type craft. First carries on using UG should model the three dimensional entity modelling, then carries on the craft analysis to it, this product precision request not too high, uses the material is ABS. the piece the wall for of type craft primarily including the piece is thick, slope and circle angle and whether to have core-pulling or not mechanism.Pass the above analysis to come t