8第7章断面局部放大及简化画法讲述.ppt

回转体上均布的 肋、孔、轮辐 旋转到剖面上 §7-4 局部放大图和简化画法 ★★ If ribs, holes and spokes are evenly distributed on a revolved body, rotate them to the split plane and section them. §7-4 局部放大图和简化画法 ★★ 2,机件的肋板、轮辐及薄壁等按纵向剖切，则这些结构被剖的断面内都不画剖面符号。 注意：外形上的截交线没有位于前后对称面上，不能直接描画在剖视图上。 按纵向剖切的肋不画剖面线 圆柱轮廓线和底板上表面画粗实线。 §7-4 局部放大图和简化画法 ★★ 2, If section the ribs, spokes and thin-walls etc on the longitudinal plane, do not draw the hatches. Note:Intersection lines are not on the longitudinal plane, which can not be drawn in the view. Do not draw hatches if section the rib on the longitudinal plane The contou