Forging of Metals elmatshell金属 elmat壳体锻造.pptVIP

Forging of Metals Introduction A metal is shaped by compressive forces Oldest metal working process – 4000BC Can be performed with a hammer and anvil Typical forged products: Bolts Rivets Connecting rods Gears Lading-gear components for the C5A and C5B transport aircraft, made by forging. Steps involved in forging a bevel gear with a shaft. Outline of Forging and Related Operations Grain Structure Parts have good strength High toughness Forgings require additional heat treating Fig : A part made by three different procedures, showing grain flow (a) casting (b) machining (c) forging Open-Di