WP 4 High speed maintenace EFRTCWP 4高速维修 efrtc.pptVIP

Deliverables/Milestones D4.1 Improvements analysis; Improvements in high performance (speed) maintenance and modular infrastructure D4.2 Optimised maintenance activities: Optimised maintenance activities, like grinding, tamping and other maintenance processes MS6 Guidlines for High Performance maintenance * * www.automain.eu A Joint Research Project funded under the Seventh Framework Programme (FP7) of the European Commission www.automain.eu A Joint Research Project funded under the Seventh Framework Programme (FP7) of the European Commission www.automain.eu A Joint Research Project funded under the Seventh Framework Programme (FP7) of the European Commission * www.automain.eu A Joint Research Project funded under the Seventh Framework Programme (FP7) of the European Commission Innovations in high (speed) performance maintenanceWP4 Ulla Juntti Lule? University of Technology October 4th Paris High performance maintenance High performance maintenance is a combination of all innovative, technical, logistic and managerial actions during the life cycle of any engineering asset to assure high dependability with minimum cost. Objectives To provide more capacity for freight trains by: Speeding up large scale maintenance (e.g. grinding and tamping) by elimination, reduction /isolation of performance killers, and elimination of cost and risk drivers. Reduce maintenance time for switches and crossings by introducing a modular approaches, including the future technological requirements and current IMs’ practices. Develop methods for introducing optimal maintenance methods and principles. tasks Identification documentation of performance killers and drivers which will facilitate development of guidelines to deal with performance killers; High performance grinding High performance tamping Modular switches and crossings Optimised maintenance systems/principles and its application 1. Performance killers Grinding (5) Bad rout planning and short worksites Production tar