TRICN硬件交流.pptVIP

沈鼓自控公司 TRICON硬件交流 主要内容 Tricon 硬件结构及特点 Tricon 系统组成 Tricon I/O 模块 现场端子板 点故障演示 典型网络结构　　　　　　　　　　 Definition of Tricon – TMR Fault Tolerance Controler: ? High Safety Integrity - High Safety Availability due to TMR architecture, diagnostics, and on-line repair 高度安全性 – 来自TMR的硬件结构, 自诊断以及在线维修 ? High Availability - Eliminates spurious (false) trips 高可用性 - 消除误停车 Triple Modular Redundancy provides correct control in presence of any Single fault 三重化组件提供正确的控制，即使存在任何单一故障 Ability to operate with 3, 2 or 1 MP(s) before shutdown 停车前的MP 3-2-1的工作能力 On-line repair provides replacement of faulty module without disrupting control 在线维护，提供更换故障组件能力，且不影响控制（不停车） Number of false shutdowns (trips) reduced 降低因错误而停车的次数 Three independent Main Processors 三重独立的主处理机 Two independent Power Supplies in each rack 每个组件箱内都配备两重冗余电源 No shared components on process I/O modules 在I/O组件内部，没有共享部件 Full isolation between channels 通道间完全隔离 Mechanical and Electrical isolation of all processing elements 系统与现场之间隔离 Tricon控制器的三重结构图 Tricon 主机架背板 A, B Redundant Power Modules C, D Network Communication Modules in Adjacent Slots E, F Digital Input Module with Hot Spare G, H Digital Input Module with Hot Spare I, J Digital Output Module with Hot Spare K, L Digital Output Module with Hot Spare M, N Digital Output Module with Hot Spare O, P Analog Input Module with Hot Spare Q, R Analog Output Module with Hot Spare A Tricon RXM Chassis (model 8112) enables additional I/O modules to be included in a system at a distance that exceeds 100 feet (30 meters) from the Main Chassis. RXM Chassis include two Power Modules, one Primary or Remote RXM Set, and six logical slots for I/O modules. A maximum of 3 primary RXM Chassis can be connected to the Main Chassis. Each primary RXM Chassis can support a maximum of 3 remote or Expansion Chassis, for a total of 9 remote RXM or Expansion Chassis in the system. I/O 扩展 EICM Switch Block Set to Us