手机背板用氧化锆陶瓷流延片烧结工艺研究.pdf

Material Sciences 材料科学, 2016, 6(6), 442-448 Published Online November 2016 in Hans. /journal/ms /10.12677/ms.2016.66055 Research on the Sintering Process of the Zirconia Ceramics Tape Casting Uropatagia as the Backboard of the Mobile Phone Xianbo Huang, Guangyuan Xie, Peng Zhao, Li Gong, Hanyue Lin, Cong Du Qingshan Campus, Wuhan University of Science and Technology, Wuhan Hubei th th th Received: Nov. 5 , 2016; accepted: Nov. 27 , 2016; published: Nov. 30 , 2016 Copyright ? 2016 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Open Access Abstract This paper compares and analyzes the relationship between the deformation of the zirconia tape casting uropatagia used as the mobile phone backboard during the sintering process and three placing modes including free placement, ballasting placement and placing baffle a certain height fromuropatagia, and it also researches the smoothing process used for smooth the warping zirco- nia backboard of the mobile phone. The result showed that ballasting placement and placing baffle a certain height from uropatagia can be used to restrain the deformation of the zirconia tape cast- ing uropatagia used as the mobile phone backboard during the sintering process. Among it, bal- lasting placement was not suitable for the sintering of large-area tape casting uropatagia; and the zirconia tape casting uropatagia sintered by means of placing baffle a certain height from uropa- tagia could be made into relatively smooth mobile phone backboard after the smoothing process, maintaining sintering temperature at 1400?Cfor four hours. Keywords