wheelloader980h.docVIP

Wheel Loader 980H Description of Wheel Loader 980H :Wheel Loader 980H is also a type of construction equipment . This Wheel Loader 980H is equipped with reliable original Cummins engine, famous original ZF wet-type axles with multi-disc limited-slip differentials, combined seal cylinder which obtains high seal performance and more reliability, dual brake valve dual pipe full hydraulic brake and central lubrication. Features of Wheel Loader 980H :1. KD switch allows better efficiency easy operation2.Reliable ZF transmission case and Torque Converter3.Bucket automatic leveling ability4. It can deliver maximum traction in changing traction conditions Technical Specification: Overall Dimension 1 Length(with bucket on ground) 8696(mm) 2 Width(to outside of wheels) 3099(mm) 3 Bucket width 3250(mm) 4 Height(To the top of the cab) 3710(mm) 5 Wheel base 3400(mm) 6 Tread 2350(mm) 7 Min. ground clearance 495.5(mm) Main Technical Specification 1 Rated load 7500(Kg) 2 Operating weight 23500kg 3 Rated bucket capacity 4.2(m3) 4 Max. breakout force 218KN 5 Max. Drawing force 222 KN 6 Max. dump clearance 3220(mm) 7 Dump reach 1275(mm) 8 Dump angle at any position ≥45° 9 Digging depth(with bucket bottom horizontal) 220(mm) 10 Min. turning radius (1)Outside of bucket 7042(mm) (2)Outside of rear wheel 6486(mm) 11 Pivot angle frame 38±1° 12 Oscillating angle of rear axle ±12° 13 Lifting time of bucket 6.1(sec.) 14 Lowering time of bucket 3.8(sec.) 15 Dumping time 1.9(sec.) 16 Traveling speed(Km/h) (1)1st gear (Forward/reverse) 7.4 (2)2nd gear (Forward/reverse) 12.4 (3)3rd gear (Forward/reverse) 25.9 (4)4th gear (Forward) 37 Diesel engine 1 Model Original Cummins QSM11-C290 2 Type Direct injection. Turbocharged. Water cooling 3 Rated output 216(Kw) 4 Inter-bore of cylinder/stroke 125/147(mm) 5 Total exhaust of cylinder