LEDFLEXBRITEKITSCUSTOMCUTROPELIGHT.pdfVIP

LED FLEXBRITE KITS/CUSTOM CUT ROPE L IGH T LED FLEXBRITE KITS/CUSTOM CUT Easy to use, flexible, dimmable LED rope light in Cool White and Ultra Warm White. Kits interconnect to build your own semi-custom CSA or UL Listed solution; or order UL2388 compliant sections custom cut to the nearest 36” increment. Performance ? Line voltage kits are economical - no drivers needed ? 3mm LEDs at 1” spacing emit up to 34 lumens per foot ? Dimmable with most electronic low voltage and LED/CFL dimmers* (minimum loads may apply) ? Suitable for indoor and outdoor use Construction ? Each kit includes removable five foot power cord with 1.6A inverter and fused 120V AC 2-prong plug, removable cap on opposite end and 1 clip per foot of light ? 1” LED spacing in clear UV inhibited PVC housing with 3mm LEDs wired in series parallel (36 LEDs per series) Installation ? Use clips to hold in place for most indirect view installations ? Clear plastic track should be used for direct view installations and when mounting to the underside of a shelf or ledge to prevent sagging ? Easy to install - kits interconnect and plug into standard 120V AC receptacles Custom Cut Program ? UL Listed for indoor and outdoor use ? Same specifications as ULRL-LED reels ? Custom cut to the nearest 36” increment ? Order track or clips separately as needed Specifications Series Input voltage Colors CRI or nm Wattage Lumens Kit lengths Maximum run Cuttability Beam angle Dimming Material Rating Dimensions Switching Mounting Linking LED type Rated life LR-LED (kits); ULRL-LED custom cuts 120V, 60Hz AC CW and UWW 67+(UWW) / 75+ CRI(WH) 0.77W/ft 30Lm/ft (UWW) / 34Lm/ft (CW) See individual product 192 feet N/A 120o 5-100% with ELV/LED dimmers* Clear PVC with UV inhibitor UL or CSA Listed for wet locations** 1/2”Dia. x 1” LED spacing Wall control Clips or mounting track Via LR-LED-EXT3 (kits only) 3mm LEDs, vertical mount 60,000 hrs *Per the NEC, switched wall outlets cannot be used with wall dimmers **CSA/UL Listing is vo