Mathematical model of neutral line on the contact zone in alloyed bar rolling by the round-oval-round pass sequence.pdfVIP

International Journal of Mechanical Sciences 115-116 (2016) 180–189Contents lists available at ScienceDirectInternational Journal of Mechanical Scienceshttp://d 0020-74 ☆Foun China (5 First-cla n Corr E-mjournal homepage: /locate/ijmecsciMathematical model of neutral line on the contact zone in alloyed bar rolling by the round-oval-round pass sequence$ Yong-gang Dong n, Jian-feng Song, Guo-ling Luo, Zhong-chao Ren College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Chinaa r t i c l e i n f o Article history: Received 14 December 2015 Received in revised form 23 March 2016 Accepted 24 March 2016 Available online 23 June 2016 Keywords: Bar rolling Contact zone Flow line element Reconstruction Velocity Neutral /10.1016/j.ijmecsci.2016.03.021 03/ 2016 Elsevier Ltd. All rights reserved. dation Item: Item Sponsored by National N 0775196); Natural Science Foundation of He ss Foundation of Post Doctoral Research of H esponding author. ail address: dongyonggang@ (Y.-g. Da b s t r a c t For determining the neutral line on the contact zone to determine the relative slip condition between the contact surface of rolling pieces and the roll, the contact boundary curve was proposed by obtaining the radius of flow line and the bite angle of points on the contact boundary based on the flow line method, and then the contact surface was discretized as flow line elements to build a novel analytic model to reconstruct the geometry of contact surface. Moreover, the velocity of flow lines on the contact surface along the direction of X-axis was derived by the condition of steady-state incompressible flow, and the function of neutral line was obtained by determining the neutral radius and the neutral angle of the points on the neutral line. In addition, the three-dimensional rectangular coordinates of points on the neutral line were derived. Based on these mathematical models, the three dimensional geometry of contact surface and neutral line were drawn up by mathema