洛湛线铁路路基边坡支护毕业设计稿.docVIP

洛湛线铁路路基边坡支护毕业设计稿.doc

  1. 1、本文档共71页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  5. 5、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  6. 6、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  7. 7、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  8. 8、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
本科毕业设计(论文) 题目 洛湛线铁路K566+0~K566+180 学生姓名 学号 教学院系 土木工程与建筑学院 专业年级 2009 指导教师 职称 讲师 单 位 西南石油大学 摘 要 本文详细介绍了洛湛线铁路K566+0~K566+180路基边坡的工程概况、地质条件、岩土体的物理力学性质支护方案的设计。该设计段总长为180米,边坡高度1.84-27.39米,边坡深度9.69米-15.72米。该段道路地形复杂,地质多为细沙, 支护难度较大,分析其工程性质,初步确定边坡大多需要支护。支护类型大致确定为重力式挡土墙支护和单点排桩支护。而分析用和支护大致取决于边坡的坡高和深度,因为本道路主要用于铁路所以对于坡体具有深度的一般采用重力式挡土墙来支护,支护后对于后面边坡可直接采用刷坡进行处理。而对于坡体不高于10米都可采用重力式挡土墙来支护,支护后对于后面边坡采用刷坡进行处理。对于高度大于10米的边坡,一般考虑使用适合本路段的单点排桩支护。为了节约施工材料,要对桩长进行适当的处理,节约成本。本边坡支护工程要考虑边坡支护的合理性,施工的可能性,还有经济的节约性。所以本边坡支护设计方案在满足边坡稳定性的情况下兼顾降低工程造价以及支护工程施工的可行和方便 Abstract This paper introduces the Luoyang-Zhanjiang railway K566+0 ~ K566+180 of the subgrade slope engineering geological conditions, the physical and mechanical properties of rock and soil, the design of the supporting scheme. The design for the total length of 180 meters, the slope height of 1.84-27.39 meters, depth of 9.69 meters -15.72 meters of slope. This section of the road complex terrain, geological mostly sand, supporting more difficult, analyze its engineering properties, preliminary determine the slope most in need of support. Supporting types generally identified as gravity retaining wall supporting and single row pile retaining. The analysis and support generally depends on the slope of the slope height and depth, because the road is mainly used for railway with depth for the slope by gravity type retaining wall to support, support for the back slope can be directly used for treatment of slope. As for the slope is not higher than 10 meters can be used to support the gravity retaining wall, support for behind of slope by slope treatment. For more than 10 meters height of slope, generally considered suitable for the section of the single row pile retaining. The saving construction materials, the pile length for proper treatment, cost savings. The slope to slope support account of rationality, the possibility of construction, and saving the economy of. So the slope supporting design scheme to meet the slope stabil

文档评论(0)

118books + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档