学位论文_回流式无级自动变速传动系统.docVIP

摘 要 回流式无级自动变速传动系统拥有有非常大的速比变化范围和很高的传动效率 ,在整个传动比的变化范围内能够实现连续的无级调速 ,让发动机始终在最佳燃油经济区运行。所以回流式无级自动变速传动具有广阔的发展前景。文中我们以长安羚羊 SC7101 轿车的数据资料为基础，以传动系统效率和速比变化范围为设计指标，对回流式无极自动变速传动系统的结构参数进行设计，确保汽车在各种行驶工况下传动系统效率在 80%以上 ,在不同节气门开度下汽车发动机稳态工作点均能位于最佳燃油经济线上。具体工作内容如下：对回流式无级自动变速传动系统工作原理，关键部件的作用及其运行状态进行介绍。建立回流式无级自动变速传动系统总体参数的设计方法，其主要工作内容是对的计算根据计算结果总体。 关键词：汽车；无极变速；设计；行星排 ABSTRACT Return flow automatic stepless variable speed drive has a large speed ratio range and higher transmission efficiency,In the whole transmission ratio can be achieved within the scope of the continuous stepless speed regulation,and the engine can always run optimum fuel economic zone. So the return flow automatic stepless variable speed drive has a broad development prospects. In this paper, we to changan SC7101 sedan based on the data of antelope,in transmission efficiency and transmission ratio range as the design index, the return flow infinite variable speed drive system design for the structure parameters, to ensure the transmission efficiency of vehicle under various driving conditions in more than 80%, under different throttle opening car engine static working point are located in the best fuel economy.Specific work content is as follows: The automatic return flow stepless variable speed drive system working principle, function and running state of the key parts are introduced. Establish a return flow automatic stepless variable speed drive system design method of general parameters, the main work content is to include the reverse gear ratio, the minimum/maximum speed ratio range, main reduction ratio, constant speed ratio transmission ratio, a key structure parameters calculation, etc. According to the calculation results complete drive system structure of overall draft layout. The return flow of the infinite variable speed drive system motion relations, force analysis, selection of key parts such as bearings, clutch lay the foundation. Finally complete the return flow automatic stepless variable spee